knock correction support for A8DK100Y

Report bugs/problems with ecuEdit

knock correction support for A8DK100Y

Postby boostcrazy » Mon May 11, 2009 4:09 pm

Hi Epifan! I'm unable to read/log "knock correction" for A8DK100Y - 07EDM wrx.
I've tuned a few of this ecus with the same issue. Please help to correct this problem. Thanks.
boostcrazy
 
Posts: 17
Joined: Mon Aug 21, 2006 8:29 am

Postby GeordieStew » Wed May 13, 2009 11:12 am

It works fine on my car. Need to have the laptop plugged in when selecting what to log. Then save it out.
GeordieStew
 
Posts: 2
Joined: Tue Mar 24, 2009 8:09 am

Postby boostcrazy » Wed May 13, 2009 4:39 pm

Epifan any advice on this problem? I can read other EDM wrx KC except for this particular ecu...
boostcrazy
 
Posts: 17
Joined: Mon Aug 21, 2006 8:29 am

Postby epifan » Thu May 14, 2009 11:48 am

boostcrazy wrote:Epifan any advice on this problem? I can read other EDM wrx KC except for this particular ecu...

DBW ECU have no parameter "Knock correction", parameter is named "Learned Ignition Timing". This is SSM option, not program. You can rename it in logdefs.xml if you want to "Knock correction 2" ;)
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm

Postby boostcrazy » Thu May 14, 2009 5:07 pm

epifan wrote:
boostcrazy wrote:Epifan any advice on this problem? I can read other EDM wrx KC except for this particular ecu...

DBW ECU have no parameter "Knock correction", parameter is named "Learned Ignition Timing". This is SSM option, not program. You can rename it in logdefs.xml if you want to "Knock correction 2" ;)


OK noted. Fyi over here similar earlier model 06EDM wrx (A8DH200Y) which is also DBW I'm able to read/log as KC. Anyways I'll try this out. Thanks!
boostcrazy
 
Posts: 17
Joined: Mon Aug 21, 2006 8:29 am


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 0 guests

cron