MazdaEdit Map Definitions for Mazda3

General discussion about mazdaEdit

MazdaEdit Map Definitions for Mazda3

Postby DNick454 » Thu Mar 06, 2014 5:24 am

I'm looking into the MazdaEdit software but I'm a little skeptical of how well things are documented in the software for my particular platform. After looking at some of the videos/tutorials and screenshots, it appears some of the maps have very descriptive notes on what they do, how they're calculated, and what other maps correlate to them as well. My other concern is the actual output values that are seen in the maps. Has the software been refined to a point yet where the values displayed are actual, meaningful numbers? Or are they nonsense numbers that have no real correlation to whats actually going on?

Who here is using MazdaEdit on a regular Mazda3 either Gen1 or 2? Can you comment on how well the maps are defined and described? I'm really dreading paying $500 to find out all the maps are listed as such: Fuel #1, Fuel #2, Fuel #3, and etc... It's not very descriptive of what it does and why there are so many of the same map.

Also, if anyone can provide some screenshots of this software for the MAZDA3 specifically and how everything is labeled, that'd be terrific. I don't want to pay for software that I have to continue developing on my own to make it work properly. I know how to tune, not program!

Thanks, I'm looking forward to a legitimate tuning solution and BOOST!
DNick454
 
Posts: 6
Joined: Thu Mar 06, 2014 4:43 am

Re: MazdaEdit Map Definitions for Mazda3

Postby epifan » Thu Mar 06, 2014 6:50 am

Please tell me for a what type of ECU do you want to know available maps and I'll send to you a list of maps which are available at this moment.
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm

Re: MazdaEdit Map Definitions for Mazda3

Postby DNick454 » Fri Mar 07, 2014 4:38 am

It's a Gen2 Mazda3 2.0L. I'm curious to see how the maps are labeled, which ones are usable, and how the units are displayed. Thank you for the fast response.
DNick454
 
Posts: 6
Joined: Thu Mar 06, 2014 4:43 am

Re: MazdaEdit Map Definitions for Mazda3

Postby epifan » Fri Mar 07, 2014 6:07 am

This is typical map's list for Mazda3 gen2:

Calculated Torque? Drive by Wire
Closed - Open Loop Accel Treshold - High Det Closed / Open Loop
Closed - Open Loop Accel Treshold - Low Det Closed / Open Loop
Closed - Open Loop Load Treshold A Closed / Open Loop
Closed - Open Loop Load Treshold B Closed / Open Loop
Closed - Open Loop Load Treshold C Closed / Open Loop
Closed - Open Loop Load Treshold D Closed / Open Loop
Closed - Open Loop Load Treshold E Closed / Open Loop
Closed - Open Loop Load Treshold F Closed / Open Loop
Closed Loop Fuel target? Fuel
DTC List Diagnostic Trouble Codes
EGR? #1 EGR
EGR? #2 EGR
EGR? #3 EGR
EGR? #3 A EGR
EGR? #3 B EGR
EGR? #3 C EGR
EGR? #3 D EGR
Engine Load Compensation Engine Load
Engine Load Compensation Trim Engine Load
Engine Load Limit #2 A
Engine Load Limit #2 B
Engine Load Limit #2 C
Engine Load Limit A Engine Load
Engine Load Limit B Engine Load
Engine Volume Other
Fuel Closed Loop - High Det Fuel
Fuel Closed Loop - Low Det Fuel
Fuel Closed Loop - Low Det 2 Fuel
Fuel Compensation Fuel
Fuel Compensation 2 Fuel
Fuel Compensation vs Temp Fuel
Fuel Open Loop - High Det Fuel
Fuel Open Loop - Low Det Fuel
Fuel Open Loop - Low Det 2 Fuel
Fuel Trim Long Term Load Zones Fuel
Gear Ratio A Other
Gear Ratio B Other
Gear Ratio C Other
Idle #1 Idle Control
Idle #1 A Idle Control
Idle #2 Idle Control
Idle Ignition Timing A Ignition
Idle Ignition Timing B Ignition
Ignition Addition - Coolant A Ignition \ Compensations
Ignition Addition - Coolant B Ignition \ Compensations
Ignition Addition - Coolant C Ignition \ Compensations
Ignition Compensation IAT vs ECT A Ignition \ Compensations
Ignition Compensation IAT vs ECT B Ignition \ Compensations
Ignition Compensation IAT vs ECT C Ignition \ Compensations
Ignition Compensation IAT vs ECT Multiplier Ignition Timing \ Temperature compensation
Ignition Compensation? 1 Ignition \ Compensations
Ignition Compensation? 2 Ignition \ Compensations
Ignition Correction? Ignition \ Compensations
Ignition Dwell Ignition
Ignition Timing HL Closed Loop - High Det Ignition
Ignition Timing HL Closed Loop - Low Det Ignition
Ignition Timing HL Maximum A Ignition
Ignition Timing HL Maximum B Ignition
Ignition Timing HL Open Loop - High Det Ignition
Ignition Timing HL Open Loop - Low Det Ignition
Ignition Timing LL Closed Loop - High Det Ignition
Ignition Timing LL Closed Loop - Low Det Ignition
Ignition Timing LL Maximum Ignition
Ignition Timing LL Open Loop - High Det Ignition
Ignition Timing LL Open Loop - Low Det Ignition
Injector Lag Time Fuel \ Injector Scaling
Injector Scaling Fuel \ Injector Scaling
Intake VVT Cams control
Intake VVT B Cams control
Knock Correction Add Ignition
Knock Correction Decrement Value Ignition \ Knock Control
Knock Correction Increment Value Ignition \ Knock Control
Knock Correction Max RPM Ignition \ Knock Control
Knock Correction Min ECT Ignition \ Knock Control
Knock Correction Min RPM Ignition \ Knock Control
Knock Correction Mul Ignition
Knock Sensor Scalling Sensor
Load Corr? Engine Load
MAF #1 Sensor
MAF #2 Sensor
MAP Sensor Scalar A Sensor
MAP Sensor Scalar B Sensor
Maximum Allowed Knock Retard A Ignition \ Knock Control
Maximum Allowed Knock Retard B Ignition \ Knock Control
Maximum Timing Ignition
Minimum Timing A Ignition
Minimum Timing B Ignition
RPM Limit A Limiters
RPM Limit B
RPM Limiter Limiters
RPM Limiter Throttle Close Limiters
RPM x11 1000 Axises
RPM x11 500 Axises
RPM x13 500 Axises
RPM x17 500 Axises
RPM x7 1200 Axises
Requested Torque Base? Drive by Wire
Speed Lim Limiters
Speed Limit Throttle Close
Target Idle? Idle Control
Throttle Linear 1 Drive by Wire
Throttle Linear 2 Drive by Wire
Throttle Linear 3 Drive by Wire
Throttle Linear 4 Drive by Wire
Throttle Linear 5 Drive by Wire
Throttle Linear 6 Drive by Wire
Throttle Linear 7 Drive by Wire
Throttle Linear 8 Drive by Wire
Throttle Linear 9 Drive by Wire
Unkn Enrichment #1 Test \ Unkn Set #1
Unkn Enrichment #2 Test \ Unkn Set #2
Unkn Enrichment #2 A Test \ Unkn Set #2
Unkn Enrichment #2 B Test \ Unkn Set #2
Unkn Ignition Timing #2 Test \ Unkn Set #2
Unkn Ignition Timing #2 A Test \ Unkn Set #2
Unkn Ignition Timing #2 B Test \ Unkn Set #2
Unkn Ignition? Ignition
Unkn Ignition? 2 Ignition
Unkn Limit Closed / Open Loop
Unkn Load Limit Engine Load
Unkn Load Limit A Engine Load
Unkn Load Limit B Engine Load
Unkn Load Limit C Engine Load
Unkn Load Limit D Engine Load
Unkn Load Limit E Engine Load
Unkn Requested Torque #1 Test \ Unkn Set #1
Unkn Requested Torque #2 Test \ Unkn Set #2
Unkn Requested Torque #2 A Test \ Unkn Set #2
Unkn Requested Torque #2 B Test \ Unkn Set #2
Unkn Th Liner Drive by Wire
VE A Volumetric efficiency
VE B Volumetric efficiency
VE C Volumetric efficiency
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm

Re: MazdaEdit Map Definitions for Mazda3

Postby DNick454 » Fri Mar 07, 2014 7:51 am

So are there descriptions or notes on the differences between them all? Under what conditions do each activate? For example, Open Loop Load Threshold has A, B, C, D, E and F. Does MazdaEdit tell the differences between them? I don't know what A, B, C, D, E, and F means...
DNick454
 
Posts: 6
Joined: Thu Mar 06, 2014 4:43 am

Re: MazdaEdit Map Definitions for Mazda3

Postby epifan » Fri Mar 07, 2014 9:54 am

DNick454 wrote:So are there descriptions or notes on the differences between them all? Under what conditions do each activate? For example, Open Loop Load Threshold has A, B, C, D, E and F. Does MazdaEdit tell the differences between them? I don't know what A, B, C, D, E, and F means...

No, conditions are not described for this maps. Values ​​in the maps are the same, so they are usually changed to the same values without understanding for a what purpose each map.
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm

Re: MazdaEdit Map Definitions for Mazda3

Postby DNick454 » Fri Mar 07, 2014 10:21 am

So you're saying the video tutorial #1 of the map list is from EcuEdit only and MazdaEdit is sort of unfinished and making changes to specific maps is pretty much a guessing game right?
Last edited by DNick454 on Fri Mar 07, 2014 1:34 pm, edited 1 time in total.
DNick454
 
Posts: 6
Joined: Thu Mar 06, 2014 4:43 am

Re: MazdaEdit Map Definitions for Mazda3

Postby DNick454 » Fri Mar 07, 2014 1:33 pm

Here's a screenshot of the tutorial video of EcuEdit for reference. So MazdaEdit isn't finished and won't have all the descriptions and detailed map names like EcuEdit?

Image
DNick454
 
Posts: 6
Joined: Thu Mar 06, 2014 4:43 am

Re: MazdaEdit Map Definitions for Mazda3

Postby epifan » Fri Mar 07, 2014 2:05 pm

DNick454 wrote:So MazdaEdit isn't finished and won't have all the descriptions and detailed map names like EcuEdit?

All ECU ROMs at mazdaEdit are well defined
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm

Re: MazdaEdit Map Definitions for Mazda3

Postby DNick454 » Fri Mar 07, 2014 10:23 pm

So when I select a map in MazdaEdit, does it give a description like the screenshot I linked? Some of the map names seem a slightly ambiguous. I want to make sure I can tweak all aspects (cold start enrichment, cruise vs non-cruise AFR targets) without just making changes to ALL maps the same.

Again, thanks for the fast responses!
DNick454
 
Posts: 6
Joined: Thu Mar 06, 2014 4:43 am

Re: MazdaEdit Map Definitions for Mazda3

Postby jmac36 » Wed Apr 02, 2014 9:04 pm

the map names are not "ambiguous" they are very well defined. However what each does is going to be up to you to find.

The software works quite well, but its up to you to find out how to make it do what you want
jmac36
 
Posts: 1
Joined: Sun Oct 23, 2011 1:30 pm


Return to Discussion

Who is online

Users browsing this forum: No registered users and 0 guests

cron