Hi ,
I got Ecuedit logger registred and a techedge USB WB02 , i have setup ext. sensor com4 and AFR only .i tried the other option in port listing as i have a virtual com port installed from the Techedge USb , same result no AFR value .

I have 0 showing when ECU is connected , nerver seen a real value .
When switching to lambda it show 1.01 but neverchange.

The strange thing is that the "user input" wired on the WB02 side seem to work on the ecuedit logger but not the main AFR :!
need help please: )

Maybe this page could help , some much information iam a bit lost

http://wbo2.com/sw/logger.htm

I think the data the WBo2 is sending is not seen by ecuedit , something is set up wrong maybe ,port speed or anything ?

I have a problem also with WBo2 (2j1).

I have incrément a 0.3, I know not how say in English
example: I spend 0.98 at 1.01 then 1.04...

never afr = 1

Legaulois wrote:I have a problem also with WBo2 (2j1).

I have incrément a 0.3, I know not how say in English
example: I spend 0.98 at 1.01 then 1.04...

never afr = 1

This is normal. But I'll try to smooth using interpolation algorithm.

because at present, it is difficult to be precise

Thank you

is it possible for limited to 20 afr external sensor. During deceleration when it moves up to 3000

Thank

Legaulois wrote:is it possible for limited to 20 afr external sensor. During deceleration when it moves up to 3000

Thank

I can add global constant for max AFR. But it will work independed of RPM or other factors. What you think?

If we cannot logger the RPM and other at the same time, this is not good.

If we can logger the RMP or other at the same time, it is good.
If I decelerate at 3000 rpm and it immediately blocks to 20 in AFR Flight, it is all very well

look at the problem, it is good at the bottom, it is not good at the top

is difficult to read quickly

thank

I tested the latest version yesterday.
you did the very good work.
I have refined my AFR Flight and logs are immediately readable
thank you

Legaulois wrote:I tested the latest version yesterday.
you did the very good work.
I have refined my AFR Flight and logs are immediately readable
thank you

you welcome