Hi!

New mazdaEdit Pro (for professional tuners) is already available for purchase on special offer.
Please, contact to me for details (PM or e-mail).

Personal version will be available later

Currently supported:

• 1st generation of MPS (MazdaSpeed) cars - 3,6 < 2008MY
• 1st generation of CX7
• 1st generation of Mazda 3 NA 1.6, 2.0 (1Mb ECU ROM)
• 1st generation of Mazda 6 NA 2.0, 2.3 (1Mb ECU ROM)
• 1st generation of RX8 (512Kb ECU ROM)
• MX-5

Logger and ECU read/flash availiable.

Logger screens (more than 80 parameters):


Map list window for 3MPS (more than 120 maps found)


Some maps screens:







Flash log:

Enjoy!

Epifan, u r great..!!!

Too expensive for me (mainly hobby stuff). But good luck everyone!

"mazdEdit personal" coming very soon. It will be with affordable price.

GeordieStew wrote:Too expensive for me (mainly hobby stuff). But good luck everyone!

Hey. What does it look like?

west_minist wrote:Hey. What does it look like?

"Personal version" will be linked with one VIN code. So it can't be read and flash other cars. Logger will be work with any mazda car.

Epifan, how buy and how cable need for this soft?

mazda tribute 2001 JDM support?

inside23 wrote:cable need for this soft?

OpenPort 2.0

inside23 wrote:mazda tribute 2001 JDM support?

I think that this car is not have CAN bus.

Anyone have an opportunity to use this yet?

Will this software allow me to remove MILS from the ECM.. For example would I be able to flash my ECM to remove the EGR functions, or modify the way the readiness test is performed to prevent the MIL from coming on??

SSinstaller wrote:Will this software allow me to remove MILS from the ECM.. For example would I be able to flash my ECM to remove the EGR functions, or modify the way the readiness test is performed to prevent the MIL from coming on??

This is not software depending You can do anything with ECU logic and maps depending on your knowledges. And, yes, DTC table is present in descriptions and you can turn off any DTC CEL.

So this will will allow me to completely remove the MIL from the ECM firmware?? Not just turn the light off, correct??

Could you please post some screen shots of the table/tables you mentioned... If this will allow me to pass my emissions inspection without re-installing the EGR, I will definitely buy as soon as the personal version is available...

SSinstaller wrote:So this will will allow me to completely remove the MIL from the ECM firmware?? Not just turn the light off, correct??

If you are good reverse engineer and asm-programmer you can do this easily

SSinstaller wrote:Could you please post some screen shots of the table/tables you mentioned... If this will allow me to pass my emissions inspection without re-installing the EGR, I will definitely buy as soon as the personal version is available...

Screenshot of 1D map with switch (turn on, turn off)?

That would be fine...


So If I buy MazdaEdit Pro/Presonal when you release it I will be able to read from the ROM on my ECM, edit the maps, and then flash the edited maps back to my ECM??

What's it cost, when can I buy it??

SSinstaller wrote:So If I buy MazdaEdit Pro/Presonal when you release it I will be able to read from the ROM on my ECM, edit the maps, and then flash the edited maps back to my ECM??

exactly