No value logging WBO2

Report bugs/problems with ecuEdit

No value logging WBO2

Postby vulpina » Mon Jul 20, 2009 9:14 pm

Hi ,
I got Ecuedit logger registred and a techedge USB WB02 , i have setup ext. sensor com4 and AFR only .i tried the other option in port listing as i have a virtual com port installed from the Techedge USb , same result no AFR value .

I have 0 showing when ECU is connected , nerver seen a real value .
When switching to lambda it show 1.01 but neverchange.

The strange thing is that the "user input" wired on the WB02 side seem to work on the ecuedit logger but not the main AFR :!
need help please: )
vulpina
 
Posts: 2
Joined: Mon Jul 20, 2009 9:02 pm

Postby vulpina » Tue Jul 21, 2009 1:03 am

Maybe this page could help , some much information iam a bit lost :)

http://wbo2.com/sw/logger.htm

I think the data the WBo2 is sending is not seen by ecuedit , something is set up wrong maybe ,port speed or anything ?
vulpina
 
Posts: 2
Joined: Mon Jul 20, 2009 9:02 pm

Re: No value logging WBO2

Postby Legaulois » Wed Oct 28, 2009 8:16 am

I have a problem also with WBo2 (2j1).

I have incrément a 0.3, I know not how say in English
example: I spend 0.98 at 1.01 then 1.04...

never afr = 1
Legaulois
 
Posts: 63
Joined: Thu Jul 03, 2008 2:24 pm
Location: Nice - France

Re: No value logging WBO2

Postby epifan » Thu Oct 29, 2009 12:19 pm

Legaulois wrote:I have a problem also with WBo2 (2j1).

I have incrément a 0.3, I know not how say in English
example: I spend 0.98 at 1.01 then 1.04...

never afr = 1

This is normal. But I'll try to smooth using interpolation algorithm.
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm

Re: No value logging WBO2

Postby Legaulois » Thu Oct 29, 2009 5:34 pm

because at present, it is difficult to be precise

Thank you
Legaulois
 
Posts: 63
Joined: Thu Jul 03, 2008 2:24 pm
Location: Nice - France

Re: No value logging WBO2

Postby Legaulois » Mon Nov 16, 2009 6:45 am

is it possible for limited to 20 afr external sensor. During deceleration when it moves up to 3000 :?

Thank
Legaulois
 
Posts: 63
Joined: Thu Jul 03, 2008 2:24 pm
Location: Nice - France

Re: No value logging WBO2

Postby epifan » Mon Nov 16, 2009 7:02 am

Legaulois wrote:is it possible for limited to 20 afr external sensor. During deceleration when it moves up to 3000 :?

Thank

I can add global constant for max AFR. But it will work independed of RPM or other factors. What you think?
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm

Re: No value logging WBO2

Postby Legaulois » Mon Nov 16, 2009 5:05 pm

If we cannot logger the RPM and other at the same time, this is not good.

If we can logger the RMP or other at the same time, it is good.
If I decelerate at 3000 rpm and it immediately blocks to 20 in AFR Flight, it is all very well

look at the problem, it is good at the bottom, it is not good at the top
Image
is difficult to read quickly

thank
Legaulois
 
Posts: 63
Joined: Thu Jul 03, 2008 2:24 pm
Location: Nice - France

Re: No value logging WBO2

Postby Legaulois » Sun Nov 29, 2009 6:59 am

I tested the latest version yesterday.
you did the very good work.
I have refined my AFR Flight and logs are immediately readable :D
thank you :wink:
Legaulois
 
Posts: 63
Joined: Thu Jul 03, 2008 2:24 pm
Location: Nice - France

Re: No value logging WBO2

Postby epifan » Wed Dec 02, 2009 6:25 pm

Legaulois wrote:I tested the latest version yesterday.
you did the very good work.
I have refined my AFR Flight and logs are immediately readable :D
thank you :wink:

you welcome ;)
epifan
Site Admin
 
Posts: 825
Joined: Thu Jul 13, 2006 3:17 pm


Return to Troubleshooting

Who is online

Users browsing this forum: No registered users and 0 guests

cron